Reynolds India Ltd. are a professional heat exchanger and double pipe heat exchanger manufacturer. We can produce custom Heat Exchangers and Double Pipe Heat Exchangers according to your requirements.
Double-pipe heat exchanger is made of concentric inner and outer pipe. Cold and hot liquid respectively flows in the gap of inner pipe and sleeve pipe and changes heat at the same time. lnner pipe is used U tube to connect. Sleeve pipe is used direct pipe to connect at both ends . Structure of double pipe heat exchanger is simple and heat transmission is large. It's easy to clean an convenient to disassemble and assemble. Flow rate is appropriate and it is possible to have a backwash. Flow rate of exchanging heat is high.
It is made of imported 316L stainless steel pipe. Connection of clamp type is easily disassembled and cleaned .
Inner pipe is ¢ 10 x ¢ 1. 5mm and outer pipe is 2".
Electrochemical polishing of inner surface reaches Ra0.2µm ~ Ra0.4µm.
One of outer surface reaches same effect as mirror.
Installation of pipe sect is used the mode of spring-type screw rise, fix it on center support to reduce occupied area and make each pipe sect
have a lean degree of 5 ~ 10 with level.There is no remained liquid in inner pipe.
Area of exchanging heat:1m2,1.5m2,2m2,2.5m2,3m2.
Length of one way: 1000mm
Effective heat-exchanging area of one way:0.07m2
Max.working pressure:1.0Mpa
Range of flow:0.915 ~ 2.44m/s
Max.working temperature:150 ℃
Coefficient of heat transmission:water-water:1700 ~ 2900 w/ (m2. ℃ )
